1400W Garden Pond Vacuum Cleaner — 14ft Hose with Intermittent Drain

This garden pond vacuum is built around a 1400W motor that pulls muck, leaves, and fish waste through a wide nozzle and into an internal collection chamber. It handles solids up to about 3/8" and is intended for decorative ponds no deeper than 3 feet. The intermittent drain system uses a float switch that stops the motor when the chamber fills; the collected water and solids then flow out via the output hose and the motor restarts automatically once the chamber empties. That cycle lets you clean large areas without frequent stops to dump debris.

The package contains the main vacuum unit (14.4" L × 13.4" W × 22.4" H; 16.8 lbs), a 14‑foot intake suction hose, four rigid extension tubes (roughly 1 foot each) to reach across and down the pond, three nozzle options (wide for general pickup, narrow for tight spots, and a brush nozzle for scrubbing algae from liners), a 6.5‑foot output hose, a mesh debris collection bag that attaches to the output to trap solids, a 13‑foot grounded power cord, and an instruction manual. The shipping carton measures about 14.8" × 14.6" × 25.2" and weighs roughly 20.7 lbs.

Assembly is straightforward: pick a nozzle, connect the extension tubes and intake hose, fasten the output hose and debris bag, plug into power and begin. For steady performance keep the intake hose as straight as possible and rinse the mesh bag after use. A one‑month warranty is provided. Avoid using this unit in swimming pools, deep water features beyond 3 feet, or large natural lakes where the design and safety limits are exceeded.